I have done a search through the forum and cannot find an answer to my specific question. I am wondering if anyone who has successfully used a clone a willy kit can tell me if the end result is harness compatable, such as does it have a base flared enough to use with a harness ring?
I cannot find any current threads about clone a willy kits, so if anyone has tried one recently I would welcome hearing your experience and suggestions as well
Never used one sorry but do they still have a vibrator that you insert? Think you can get a screw on end with a suction cup attached. There’s replacement vac u loc plug with suction cup base from the doc j. Maybe be able to insert that instead of the vibe. Google is your friend to source.
Have used dildo with suction base and harness with o ring, just push dildo through the ring works perfect.
Good luck
We’ve used one, great fun to make, but no, by default, not a flared base. Our finished product isn’t flared at all as his cock took, essentially, the full width at the base. As @steevo68 says though, you just place the vibrator in the top before it hardens so there’s nothing stopping you switching this out for a flared suction cup base of some sort (not available on LH but available elsewhere) or the vac-u-lock plug (full vac-u-lock kit available here).
Brings a whole new meaning to go fuck yourself doesn’t it
Thanks all for the replies. Good to know it does not inherently make a flared base but a flared base can be fabricated easily enough. I likely have a toy around that will work just right for this or if not can put something together
Any one used one lately that has any updated tips they would like to share?
Yes, it certainly does. Or when a certain someone tells a certain someone else “fuck you” it could be more possible lol
Maybe there’s an add on you can get what allows you to make it compatible 
You can make one, there is a walk through somewhere online.
Basically once youve made you mould, you tape another 1inch of plastic to the top l, so when you pour in the sillicone it over flows, and you put a circle shape (a ball or somethibg that the silicone wont stick to) to create a crator shape in the sillicone
There is an indepth guide via google
Good to know. Thank you
I’m a bit late to this, but would the Clone-a-Willy and Balls work?
The O-Ring would sit above the balls, making the mould harness compatible 
It looks like it might. Maybe someone on here has tried it and can give some feedback