Appreciate this topic has been discussed before in the forums, but recently purchased a clone-a-willy kit and would be grateful to hear of people’s experiences and tips to get the best result.
1 Like
Oh I’d love to know what people say about this. I’ve been eyeing up one of these kits for ages!
I hope yours turns out great 
2 Likes
We tried making the cock and balls one 
It was tricky and took us a couple attempts but came out pretty well. We had fun doing it but it wasn’t really worth the effort for us.
Seem to remember we had to build the container and seal it with tape. Then once the two ingredients are mixed you don’t have much time to pour and stick ‘it’ in. Plus it takes a bit of time to fully set. So it was all a little difficult to get right.
We tried to set a suction cup into it (instead of the vibrator it came with) which didn’t work well and we ended up binning it.
So it’s not perfect and quite pricey, but is still good fun! Like a sexy craft set 
wouldn’t go as far as to recommend it but it’s alright. Seemed like lots of people online had a similar experience to us. But this was a few years ago so the product may have improved a bit since we tried it.
2 Likes
Have a look on YouTube. There are lots of reviews and ‘how to’ videos.
2 Likes
As mentioned earlier, you don’t have long to insert into the mixture before it starts to set. The trick is to make sure you are hard at that time. It might pay to make sure you have some extra ingredients in case you have to start again.
1 Like
We gave it a try, I ended up liking my hard on as I stuck it in, we have a nice replica of my semi, would recommend using a cock ring or something similar to aid in keeping it stiff, it’s hard to stay in the mood, mix and pour then get in there…
I have been thinking of cloning myself . From all the videos I have watched and everything I have read I think I would order extra mix and buy a good quality bullet with remote . Then when I was ready for a pour , I would take maybe a 50 mg Viagra to make sure my cock was at a rock solid erection ahead of time . As in some toys , by the time you get everything set up I may not be up to my full “average” length and girth . When people tell me to go ____ yourself , I could . Have many anal toys , but mentally it would be interesting to feel an exact copy of me . If I was single , I would make copies to give to lonely single women I know that might appreciate " a piece of me " , for when I could not be there .
1 Like
I’d like to make a hand with one of these…!
Read the instructions very carefully before you start as the timings and temperature of the mix is critical for a good result and as said you don’t have long once the mixture is ready. You also really need to do this as a couple so he can focus on getting ready while his partner prepares the mixture and to help keep him hard while waiting for the mixture to set. I’d recommend trimming/shaving too if you don’t want a painful pull of hairs on removal. Also do it in the shower or somewhere easy to clean up the overflow when inserting. If girthy or you have a slight bend at all you need to position carefully to ensure you get a good coverage and that none of his penis touches the tube.
It took us a couple of goes to get a result out of one of these and we ended up buying some extra moulding compound but it was a fun experience and a pretty good clone
1 Like